Product Selector

Alishield N1 Roller Shutters

  • Alishield N1


The Alushield N1 roller shutter can provide multi purpose; with its punched apertures of 125mm x125mm it can provide vision and ventilation through the security shutter. Polycarbonate infill can be placed to cover the apertures when ventilation is not required and a window effect is created. The medium duty 50mm flat punched extruded aluminium lath will require less head room than comparable roller shutter doors.

Common use

The N1 Alushield shutter is commonly used for protecting retail, commercial, servery's, counters and areas of moderate size that require a roller shutter with either ventilation of vision.

Alishield F3

Maximum Width:



Normally 52mm x 1.5mm


6.4kg per square metre


Mill finish as standard, polyester powder coat colours and anodised finishes are available.

View Shutter Box Specifications


0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.

Box sizes

Overall height (top of box)
Up to 2800mm box size 254mm
Up to 3800mm box size 305mm


Galvanised steel as standard, polyester powder coat colours are available at.

View Guide Rail Specifications


Standard guide rails are 38mm x 29mm x 3mm aluminium
Electric shutters require a 50mmx50mm steel box section (one side only) used to allow for motor unit.


Mill finish as standard, Polyester powder coat colours and anodised finishes are available.

View Operational Specifications

Spring Loaded

A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.

Single Phase Electric

A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating.
Draw 240 volts and 0.5 - 2.5 amps dependant upon the shutter size
Provision of a 13 amp fused spur is required for installation


A manual override is included to operate the shutter in the event of a power failure. This is usually only Operable from only one side.


Standard security key switch or rocker switch.
Other controls are available on request.

Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering.
HAG operates a policy of continuous improvement.

Our Products & Services