Product Selector

Alulink Grille G3 Roller Shutters

  • Alulink G3


The Alulink G3 is "linkage" style roller grille in an "In line" design, manufactured from 52mm aluminium links with 85mm tubes. The security grille allows maximum vision giving a unique doorway and shop protection in one.

Common use

Suitable for smaller openings the Alulink G3 is recommended for internally installations when the highest degree of ventilation or vision is required for a roller grille system, such as serving hatches and dispensaries.

Alishield F3

Maximum Width:



85mm wide x 50mm high




Mill finished aluminium, polyester powder coat colours are available.

View Shutter Box Specifications


0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.

Box sizes

Overall height (top of box)
1300mm Box size 254mm
2000mm Box size 305mm


Galvanised steel, polyester powder coat colours are available.

View Guide Rail Specifications


Standard guide rails: 38mm x 29mm x 3mm - 67mm x 32mm x 3mm dependant on width
Electric shutters require a 50mm x 50mm steel box section (both sides) used to allow for motor unit and safety brake.


Mill finish aluminium, polyester powder coat colours and anodised finishes are available.

View Operational Specifications

Spring Loaded

A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.

Single Phase Electric

A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating.
Draw 240 volts and 0.5 - 2.5 amps dependant upon the shutter size
Provision of a 13 amp fused spur is required for installation


A manual override is included to operate the shutter in the event of a power failure. This is usually only Operable from only one side.


Standard security key switch or rocker switch.
Other controls are available on request.
Please note when electric option is specified please confirm how you will lock shutter as this product does NOT self lock

Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering.
HAG operates a policy of continuous improvement.

Our Products & Services