Product Selector

Armourguard® F2

  • Armourguard F2
  • Armourguard F2
  • Armourguard F2
  • Armourguard F2
  • Armourguard F2
  • Armourguard F2
  • Armourguard F2

Description

The Armourguard F2 combines the excellent insulation properties of a industrial roller with a high quality plastisol coated finish. It is manufactured from a double skinned foam filled interlocking 22g galvanised steel sections.

Common use

The F2 roller shutter is best specified to protect industrial loading and warehouse type properties that require a roller shutter with insulation properties and a heavy duty durable finish complementing or matching cladding on a building as a doorway or window security shutter.

Alishield F3

Maximum Width:

12000mm

Dimensions:

Normally 100mm x 27mm foam filled

Weight:

18.4kg square metre

Finish:

GHP200 is British Steel's roofing and cladding steel with a 2000 micrometre (nominal thickness) high-performance plastisol coating on a galvatite hot dip zinc coated substrate to BS EN 10146. The standard reverse side coating is a specially formulated two coat protective system of corrosion resistant primer topped with a heat cured high performance polyester.

View Shutter Box Specifications

Construction

0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.

Box sizes

Overall height (top of box)
Up to 3000mm box size 400mm
Up to 4000mm box size 450mm
Up to 5000mm box size 510mm

Finish

HP200 is British Steel's roofing and cladding steel with a 2000 micrometre (nominal thickness) high-performance plastisol coating on a galvatite hot dip zinc coated substrate to BS EN 10146. The standard reverse side coating is a specially formulated two coat protective system of corrosion resistant primer topped with a heat cured high performance polyester.

View Guide Rail Specifications

Construction

Standard guide rails are 90x32x3mm galvanised steel.

View Operational Specifications

Hand Chain Operation (Industrial)

A counter balanced helical spring controlled via hand chain and chain lock to secure.

Three Phase Electric Operation (Industrial)

Conventional or direct drive industrial motor unit with integral travel limits, thermal cut out, low level hand chain override or high level hand crank override and push button control as standard.

Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering.
HAG operates a policy of continuous improvement.

Our Products & Services