Product Selector

Armourguard® P1 Roller Shutter Security Grilles

  • Armourguard P1
  • Armourguard P1

Description

The Armourguard P1 provides 30% vision through the shutter curtain allowing shop front displays to be viewed when closed. Each 0.9 mm thick galvanised steel sections is perforated with 3mm holes providing strength and style in one system.

Common use

The P1 security roller shutter is best utilised in shop front security, servery areas, kiosks, showrooms and retail outlet doorways when head room and fixing spaces are reduced and need vision or a degree of ventilation from a roller shutter system.

Alishield F3

Maximum Width:

3500mm

Dimensions:

Normally 50mm x 0.91mm

Weight:

13kg per square metre

Finish:

Galvanised bright rolled mild steel. Polyester powder coat colours are available.

View Shutter Box Specifications

Construction

0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.

Box sizes

Overall height (top of box)
Up to 2050mm box size 254mm
Up to 2800mm box size 305mm
Up to 3500mm box size 355mm

Finish

Galvanised steel standard. Polyester powder coat colours are available at an additional cost.

View Guide Rail Specifications

Construction

Standard guide rails: 38mm x 32mm x 3mm - 67mm x 32mm x 3mm dependant on width.
Electric shutters require a 50mm x 50mm steel box section (both sides) used to allow for motor unit and safety brake.

Finish

Galvanised steel standard polyester powder coat colours are available.

View Operational Specifications

Spring Loaded

A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.

Single Phase Electric

A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating.
Draw 240 volts and 0.5 - 2.5 amps dependant upon the shutter size
Provision of a 13 amp fused spur is required for installation

Override

A manual override is included to operate the shutter in the event of a power failure. This is usually only Operable from only one side.

Control

Standard security key switch or rocker switch.
Other controls are available on request.

Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering.
HAG operates a policy of continuous improvement.

Our Products & Services