Product Selector

Armourguard® P2 Roller Shutters

  • Armourguard P2
  • Armourguard P2
  • Armourguard P2
  • Armourguard P2
  • Armourguard P2
  • Armourguard P2
  • Armourguard P2
  • Armourguard P1
  • Armourguard P2

Description

The Armourguard P2 is the most popular shop front roller shutter system. It allows 30% vision through the curtain to ensure the all-important and valuable shop front display is seen when the premises are closed. The 76mm curved profile is perforated with 3.5mm holes in a 0.9 mm thick galvanised steel lath giving the assurance of a high security system.

Common use

The P2 roller shutter will protect retail outlets, shop front, kiosks, showrooms, reception areas, supermarkets and car parks where a roller shutter product must incorporate a degree of vision or ventilation for a doorway or window.

Alishield F3

Maximum Width:

10000mm

Dimensions:

Normally 76mm x 0.91mm

Weight:

10kg per square metre

Finish:

Galvanised bright rolled mild steel. Polyester powder coat colours are available.

View Shutter Box Specifications

Construction

0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.

Box sizes

Overall height (top of box)
Up to 2050mm box size 254mm
Up to 2800mm box size 305mm
Up to 3500mm box size 355mm
On large widths box sizes may move up one size due to deflection

Finish

Galvanised steel standard. Polyester powder coat colours are available.

View Guide Rail Specifications

Construction

Standard guide rails: 38mm x 32mm x 3mm - 100mm x 32mm x 3mm dependant on width
Electric shutters require a 50mm x 50mm steel box section (both sides) used to allow for motor unit and safety brake. A 76mm x 50mm box section will be used for shutters over 160kg in weight (5000mm x 3200mm approximately).

Finish

Galvanised steel standard polyester powder coat colours are available.

View Operational Specifications

Spring Loaded

A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.

Single Phase Electric

A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating.
Draw 240 volts and 0.5 - 2.5 amps dependant upon the shutter size
Provision of a 13 amp fused spur is required for installation

Three Phase Electric

Design of this model will alter for three phase operation.
Electrical requirements are dependant on usage, further details on request.

Override

A manual override is included to operate the shutter in the event of a power failure. This is usually only Operable from only one side.

Hand Chain Operation (Industrial)

A counter balanced helical spring controlled via hand chain and chain lock to secure.

Control

Standard security key switch or rocker switch.
Other controls are available on request.

Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering.
HAG operates a policy of continuous improvement.

Our Products & Services