Clearguard Roller Shutters

Construction

0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.

Box sizes

Up to 3650mm Height - 350mm

Finish

Polyester powder coat colours are available.

Construction

110mm x 38mm x 3mm extruded aluminium with PVC Guiding Strips

Finish

Mill finish as standard, polyester powder coat colours and anodised finishes are available.

Single Phase Electric

A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating.
Draw 240 volts and 0.5 - 2.5 amps dependant upon the shutter size
Provision of a 13 amp fused spur is required for installation

Override

A manual override is included to operate the shutter in the event of a power failure. This is usually only Operable from only one side.

Control

Standard security key switch or rocker switch.
Other controls are available on request.

Standards

Light Transmission: 87% > 90% Test Method according to DIN 5036 Extreme impact strength: ISO 179
Resistant against a high thermal expansion: temperatures - 100 up till + 120o C. Fire conduct: DIN 4102 fire slow-down.
Polycarbonate standard quality is suitable for inside- use, scratch resistant polycarbonate (coated on both sides) is suitable for outside-use. Applications in thickness: 3, 5 and 6 mm for rolling shutters, 5, 6 and 8 mm for safety-windows.