Our Products & Services
Fireguard FG01 Fire Shutters
Description
Fireguard FG01 Fire Shutters, 76mm curved, galvanised solid 20 gauge lath
Common use
Commercial and Industrial where 1 - 4 hour fire rating is required.
Maximum Width:
8000mm
Dimensions:
Normally 76mm x 0.71mm
Weight:
11.32kg per square metre
Finish:
Galvanised bright rolled mild steel but polyester powder coat colour's are available at additional cost.
View Shutter Box Specifications
Construction
0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.
Box sizes
Overall height (top of box)
Up to 3500mm Box size 350mm
Finish
Galvanised steel standard polyester powder coat colours are available at an additional cost.
View Guide Rail Specifications
Construction
63mm x 32mm x 3mm - 100mm x 32mm x 3mm Dependant on Width and Height.
Finish
Galvanised steel standard polyester powder coat colours are available.
View Operational Specifications
Electrically operated through industrial grade 1 phase motor controlled by up/stop/close controller.
Auto Reset solenoid for integration with fire alarm to enable the motor to automatically unbrake and close under controlled decent.
FCP03 Fire panel which can be interconnected to the Fire Alarm to allow closing when receiving Fire signal. Audio visual warning and timer delay
Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering.
HAG operates a policy of continuous improvement.
