Product Selector

Seceuro CD800 Built On Roller Shutters

  • Seceuro CD800


The Seceuro CD800 shutter is a 77mm single skinned extruded aluminium lath with punched apertures to form an open grille type rolling shutter providing ventilation and vision to varying degrees. The system can also increase its security level when adding polycarbonate backing to the lath.

Common use

The Seceuro CD800 is best securing shopping centres, malls and airports helping show window displays when closed.

Seceuro CD800 Built On

Maximum Width:



Nominally 77mm high x 1.8mm thick. Vision panel provides 65% vision. (150mm x 55mm aperture)


Optional glazing of 2mm polycarbonate.
9.25kg per square metre. (Without vision)
7.75Kg per square metre. (Vision and glazed)
75 x 70mm spacing 8kg per square metre


White, brown, alternative standard RAL or BS colours at an extra cost.

View Shutter Box Specifications


Roll formed aluminium in two sections; top and bottom boxes.
Bottom box removable for installation and maintenance and Chamfered at 45°.
The shutter box is assembled on die cast aluminium endplates.

Box sizes

Clear opening height (to underside of box):
1500mm, box size 250mm
2900mm, box size 300mm


White, dark brown. Alternative standard RAL or BS colours at an extra cost.

View Guide Rail Specifications


90mm wide x 34mm deep (UPH 250). With High density 4mm pile brush seals for quiet and smooth operation.


White, dark brown, alternative standard RAL or BS colours at an extra cost

View Operational Specifications

Spring Loaded

A counter balanced spring ensures controlled raising and Lowering with a key lock in-built at the bottom of the shutter for Security.

Single Phase Electric

Provision of a 13 amp fused spur is required for installation.
A tubular motor within the barrel assembly with limit switches and the thermal cut out to prevent overheating.
Draw 240 volts and 0.5 - 2.5 amps dependant upon the shutter size


Standard security keyswitch or rocker switch. Other controls are available on request.


A Manual override should be priced and ordered separately for Shutters which are to be installed on exit doorways to permit Operation in the event of a power failure. This is usually only Operable from only one side.

Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering.
HAG operates a policy of continuous improvement.

Our Products & Services