Product Selector

Seceuro CD900 Built On Roller Shutters

  • Seceuro CD900
  • Seceuro CD900
  • Seceuro CD900
  • Seceuro CD900
  • Seceuro CD900
  • Seceuro CD900
  • Seceuro CD900

Description

The Seceuro CD9000 rolling grille system is manufactured from silver anodised extruded aluminium links supported by an extruded aluminium bar with 150mm spacing bars to form a "brick bond" or "in line" design grille.

Common use

This roller shutter is normally installed for internal security for retail premises, shopping mall doorways, bars and kiosk units that require maximum vision from a security system.

Seceuro CD900 Built On

Maximum Width:

5000mm

Dimensions:

150mm x 70mm Apertures.

Weight:

150mm x 70mm spacing 7kg per square metre
75mm x 70mm spacing 8kg per square metre
75 x 70mm spacing 8kg per square metre

Finish:

Satin silver anodised as standard.
Powder coated to standard RAL or BS colours at an extra cost

Regular or brick bond pattern. Solid slats can be included at extra cost for visual effect or extra strength.
Certain logos and designs can be incorporated in the construction of the grille.

View Shutter Box Specifications

Construction

Roll formed aluminium in two sections; top and bottom boxes.
Bottom box removable for installation and maintenance and Chamfered at 45°.
The shutter box is assembled on die cast aluminium endplates.

Box sizes

Clear opening height (to underside of box):
1400mm, box size 205mm
2550mm, box size 250mm
3700mm, box size 300mm

Finish

White, dark brown, Alternative standard RAL or BS colours at an extra cost.

Construction

60mm x 29mm x 3mm - 90mm x 34mm x 3mm dependant on width and height.
Both with high density 4mm - 7mm pile brush seals.

View Guide Rail Specifications

Construction

Box sizes

Clear opening height (to underside of box):
1400mm, box size 205mm
2550mm, box size 250mm
3700mm, box size 300mm

Finish

White, dark brown, Alternative standard RAL or BS colours at an extra cost.

View Operational Specifications

Spring Loaded

A counter balanced spring ensures controlled raising and Lowering with a key lock in-built at the bottom of the shutter for Security.

Single Phase Electric

Provision of a 13 amp fused spur is required for installation.
A tubular motor within the barrel assembly with limit switches and the thermal cut out to prevent overheating.
Draw 240 volts and 0.5 - 2.5 amps dependant upon the shutter size

Control

Standard security keyswitch or rocker switch. Other controls are available on request.

Override

A Manual override should be priced and ordered separately for Shutters which are to be installed on exit doorways to permit Operation in the event of a power failure. This is usually only Operable from only one side.

Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering.
HAG operates a policy of continuous improvement.

Our Products & Services