About Us

CE Compliance

To comply with the European Directive doors are required to have CE marking and have been tested to the appropriate standards. At HAG, we pride ourselves in providing a superior service to architects and contractors. Please email or call us if you cannot find the information you require in this section of our website. We will be happy to answer your questions.

CPD – Construction Products Directive

The CPD 89/106/EEC is one of the New Approach Directives. This means its aim is to allow the free movement of construction products across Europe. The CPD is a product-specific set of standard so rather than a generic risk assessment based standard applying to all machinery, each product has its own set of specific standards. Out of the 21 New Approach Directives that call for CE marking, 5 apply to roller shutters. To comply with a New Approach Directive you must satisfy the “essential requirements” of the directive. Third party testing, standards and risk assessments are methods by which compliance is achieved.

Product standards

There are several product standards that specifically apply to Industrial, Commercial, Garage Doors and Gates.

BS EN 13241-1:2003

Industrial, Commercial, Garage Doors and Gates. Part 1 Products without fire resistance or smoke control characteristics. Main product standards which call up the supporting standards.

BS EN 12453:2001

Industrial, Commercial, Garage Doors and Gates. Safety in use of power operated doors – requirements. Includes operational safety of power operated doors including ‘Drawing in’ Limitation of forces’ and the drive system.

BS EN 12604:2000

Industrial, Commercial, Garage Doors and Gates. Mechanical Aspects – Requirements and Classification. Covers the mechanical design of the product including strength calculations, safeguarding against dropping, manual operation forces. For full specification visit http://uk.ihs.com

EN 13241:2003 + A2:2016

Industrial, Commercial, Garage Doors and Gates – Product standard, performance characteristics.

EN 14351-1:2006 + A2:2016

Windows and Doors – Product standard, performance characteristics – Part 1: Windows and external pedestrian doorsets.

EN 179:2008

Building Hardware – Emergency exit devices operated by a lever handle or push pad, for use on escape routes – Requirements and test methods.

EN 1125:2008

Building Hardware – Panic exit devices operated by a horizontal bar, for use on escape routes – Requirements and test methods.

EN 1154:1996/ A1:2002/ AC:2006

Building Hardware – Controlled door closing devices – Requirements and test methods.

EN 1155:1997/ A1:2002/ AC:2006

Building Hardware – Electrically powered hold-open devices for swing doors – Requirements and test methods.

EN 1158:1997/ A1:2002/ AC:2006

Building Hardware – Door coordinator devices – Requirements and test methods.

EN 1935:2002/ AC:2003

Building Hardware – Single-axis hinges – Requirements and test methods.

EN 12209:2003/ AC:2005

Building Hardware – Locks and latches – Mechanically operated locks, latches and locking plates – Requirements and test methods.

EN 14846:2008

Building Hardware – Locks and latches – Electromagnetically operated locks and striking plates – Requirements and test methods.

EN 16034:2014

Pedestrian Doorsets, Industrial, Commercial, Garage Doors and Openable Windows – Product standard, performance characteristics – Fire resisting and/or smoke control characteristics.

FprEN 14351-2

Windows and Doors – Product standard, performance characteristics – Part 2: Internal pedestrian doorsets.

New Government Legislation for Fire Resisting Doorsets

From 1st November 2019, all new fire and smoke resisting doorsets must be fire tested and compliant to the latest standard BS EN 16034:2014 & CE Marked to BS EN 13241-1:2003. Products tested to the 2008 Certification are now prohibited by law.

For more information, download the Door & Hardware Federation’s useful FAQs

 

Resources

 

Compliance, Standards & CE Marking

 

 

 

Changes to CE Marking of Fire and Smoke Resisting Industrial Doors

 

 

 

CE Marked External Doorsets

 

 

 

Specifying CE Marked Doorsets

Our Specialist
Sectors

Our Specialist
Services

Talk to the
door specialists

Contact Us

HAG offers a wide range of products and services, if you would like further information call 0800 072 3444 now to speak to a member of our team.

Who we are
working with

  • Rolls Royce
  • Network Rail
  • VOSA
  • MITIE
  • Vinci Construction
  • Willmott Dixon