Product Specification
Product Overview
Description
The Alulink Grille G1 roller shutter grille is constructed in an inline tube and link design
Common use
Kiosk, Bars, shop front security shutters & Car park roller shutter doors where vision or ventilation is required
Maximum Width
8000mm
Dimensions
Aperture 100mm wide x 76mm high
Finish
Mill finished aluminium, polyester powder coat colours are available.
Weight
6.4kg per square metre
Shutter Box Specification
Construction
0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.
Box sizes
Overall height (top of box)
1300mm Box size 254mm 4000mm box size 400mm
2000mm Box size 305mm 5000mm box size 500mm
3000mm Box size 355mm
Finish
Galvanised steel, polyester powder coat colours are available.
Construction
Standard guide rails: 38mm x 29mm x 3mm – 100mm x 32mm x 3mm dependant on width. Electric shutters require a 50mm x 50mm steel box section (both sides) used to allow for motor unit and safety brake. A 76mm x 50mm box section will be used for shutters over 160kg in weight (5000mm x 3200mm approximately).
Finish
Mill finish aluminium, polyester powder coat colours and anodised finishes are available.
Operational Specification
Spring Loaded
A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.
Single Phase Electric
A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating. Draw 240 volts and 0.5 – 2.5 amps dependant upon the shutter size. Provision of a 13 amp fused spur is required for installation.
Three Phase Electric
Design of the model will alter for three phase operation. Electrical requirements are dependant on usage, further details on request.
Override
A manual override is included to operate the shutter in the event of a power failure. This is usually only operable from only one side.
Control
Standard security key switch or rocker switch. Other controls are available on request. Please note when electric option is specified please confirm how you will lock shutter as this product does NOT self lock.
Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering. HAG operates a policy of continuous improvement.
