Armourguard
Range

Armourguard
Model F2

Delivering excellent insulation properties accompanied by a high quality plastisol finish. Double skinned, foam filled interlocking galvanised steel sections aid temperature control and HP200 colour coating to BS EN 10147. Specifically designed for premises requiring insulated doors and maximum durability. Recommended maximum width up to 12,000mm.

HOW WE RATE THIS DOOR

HOW THIS DOOR IS COMMONLY USED

Product
Specification

Product Overview

Description

Armourguard F2, 100mm Twinned skinned 22 gauge galvanised lath HP200 plastisol colour coated finish to outside and inside if required.

alishield-f3-diagram

Common use

Loading Bay & Warehouse Doors Where Insulation is required

Maximum Width

12000mm

Dimensions

Normally 100mm x 27mm foam filled

Weight

18.4kg square metre

Finish

GHP200 is British Steel’s roofing and cladding steel with a 2000 micrometre (nominal thickness) high-performance plastisol coating on a galvatite hot dip zinc coated substrate to BS EN 10146. The standard reverse side coating is a specially formulated two coat protective system of corrosion resistant primer topped with a heat cured high performance polyester.

Shutter Box Specification

Construction

0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.

Box sizes

Overall height (top of box)
Up to 3000mm box size 400mm
Up to 4000mm box size 450mm
Up to 5000mm box size 510mm

Finish

HP200 is British Steel’s roofing and cladding steel with a 2000 micrometre (nominal thickness) high-performance plastisol coating on a galvatite hot dip zinc coated substrate to BS EN 10146. The standard reverse side coating is a specially formulated two coat protective system of corrosion resistant primer topped with a heat cured high performance polyester.

Guide Rail Specification

Construction

Standard guide rails are 90x32x3mm galvanised steel.

Operational Specification

Hand Chain Operation (Industrial)

A counter balanced helical spring controlled via hand chain and chain lock to secure.

Three Phase Electric

Conventional or direct drive industrial motor unit with integral travel limits, thermal cut out, low level hand chain override or high level hand crank override and push button control as standard.

Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering. HAG operates a policy of continuous improvement.

Our Specialist
Services

Talk to the
door specialists

Contact Us

HAG offers a wide range of products and services, if you would like further information call 0800 072 3444 now to speak to a member of our team.

Customers who viewed this
were also interested in