A flat surfaced 50 mm profile security roller shutter suited for areas with reduced overhead space.
A solid shutter door delivering a high level of security. Manual or electric operation to specification, with a variety of controls available upon request. Galvanised steel standard finish or powder coating available. Recommended maximum width 3,500 mm.
The Armourguard Model F4 roller security shutters are constructed from a 50mm flat galvanised solid 22 gauge lath.
Roller shutter doors for domestic, commercial applications requiring medium to high security.
3500 mm
Normally 50 mm x 0.71 mm
12 kg per square metre
Galvanised bright rolled mild steel, polyester powder coat colours are available.
0.91 mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances
Overall height (top of box)
Up to 2800 mm box size 254 mm
Up to 3800 mm box size 305 mm
Galvanised steel, polyester powder coat colours are available
Standard guide rails 50mm x 32mm x 3mm steel (others available on request). Electric shutters require a 50 mm x 50 mm box selection used to allow for the motor unit.
Galvanised steel as standard, polyester powder coat colours are available.
A counter-balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.
A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating. Draw 240 volts and 0.5 – 2.5 amps dependant upon the shutter size. Provision of a 13 amp fused spur is required for installation
A manual override is included to operate the shutter in the event of a power failure. This is usually operable from one side only.
Standard security key switch or rocker switch. Other controls are available on request.
HAG offers a wide range of products and services, if you would like further information call 0800 072 3444 now to speak to a member of our team.