The Armourguard F1 industrial roller shutter doors deliver high levels of security and thermal protection with the twin skin steel injected with CFC free foam insulation. F1 insulated industrial doors have a thermal value of 0.733 W/m2K (through centre of lath) and an acoustic value of 28dB reduction (At 1kHz). Meets BS EN 13241-1:2003 (class 5). Recommended maximum width up to 12,000mm.
The Armourguard F1 is an industrial insulated roller shutter door constructed from a twin skin steel lath injected with CFC free foam insulation. These insulated industrial doors are manufactured from two skins of a solid 100mm flat galvanised steel section. The F1 insulated door uses a continuous nylon end locking system and a weather proof profile that is incorporated on to the bottom section to create a seal that increases its reliability and performance. A brush strip can be used at high level to reduce air flow between the lintel and the roller shutter head plate. Glazed panels can also be incorporated into the roller shutter lath.
• Wind Load Tested BS EN 13241-1:2003 (class 5)
• Acoustic value of 28dB reduction (At 1kHz)
• Thermal Value 0.733 W/m2K (through centre of lath)
The Armourguard F1 industrial doors are ideal roller shutters for insulating large industrial openings against heat, noise and energy loss. This product is commonly used on industrial applications where insulation, soundproofing and security is the priority, such as industrial premises loading bay doors, warehouse doors, storage facilities, agriculture premises, barns and industrial units.
100mm x 27mm foam filled
16.5kg square metres
Galvanised bright rolled mild steel, polyester powder coat colours are available.
0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.
Overall height (top of box)
Up to 3000mm box size 400mm
Up to 4000mm box size 450mm
Up to 5000mm box size 510mm
Galvanised steel standard but these industrial doors are also available in a ranger of polyester powder coat colours
Standard guide rails are 90mm x 32 x 3mm galvanised steel. Double sided brush seal and carriers are used on the guide section to minimise air leakage.
Galvanised steel standard, polyester powder coat colours are available.
Conventional or direct drive industrial motor unit with integral travel limits, thermal cut out, complete with haul chain override for use in the event of power failure. Safety brakes are used to prevent the roller shutter from closing in the event of motor failure inline with EU legislation. Electrical requirements are dependant on usage, further details on request.
A chain override is included to operate the shutter in the event of a power failure. This is only operable from one side. High level hand crank override can be specified if required.
A counter balanced helical spring controlled via hand chain and chain lock to secure the C1 industrial dooor. A double spring unit is incorporated into the barrel assembly inline as a second device to prevent the roller shutter from closing in the event of single spring failure inline with EU legislation.
Electric operation is via a standard push button control. Other co ntrols are available on request.
Further safety devices are available, dependant on requirements and operational circumstances.
Prolong the life span of your door system with a maintenance contract from HAG. Regular maintenance reduces complications from wear and tear and allows for continual safe operation.
Faults happen unexpectedly and at inconvenient times, causing serious problems for premises. Our repair service can ensure your doors are repaired quickly, minimising down time and reduce potential losses.
High quality powder coating creates a professional finish to HAG products. A durable, fade resistant, long lasting finish applied by an award winning company.
Guarantee your new door system is installed professionally and to the highest standard. Benefit from the knowledge that a HAG installed product will be fully operational and installed on time.
HAG continue to manufacture bespoke doors to ensure exceptional standards and quality. Our experience in design, installation and maintenance helps us to produce doors suited to exact needs and requirements.
Benefit from experience and knowledge with our Door System Design service. HAG can help you meet your specification requirements by designing a door system tailored to your existing premises or building design.
HAG offers a wide range of products and services, if you would like further information call 0800 072 3444 now to speak to a member of our team.