Extremely well suited for areas requiring a high degree of ventilation and vision. The N2M roller shutters offer a good level of security and a full curtain will allow for 55% air flow. Choose ‘in line’ or ‘brick bond’ patterns. Galvanised steel standard finish of powder coating. Recommended maximum width up to 8,000mm.
The Armourguard N2 Maximum roller shutters are constructed from 76 mm Curved Galvanised 20 gauge lath with 75mmx45mmx12mm pitch apertures in a choice of “brick bond” or “inline” pattern. A full curtain of N2M will provide 55% air flow.
Kiosk, Bars, shop fronts security shutters & Car parks roller shutter doors where vision or ventilation is required
Normally 76mm x 0.91mm
9.21kg per square metre
Galvanised bright rolled mild steel, polyester powder coat colours are Available.
0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.
Overall height (top of box)
Up to 2050mm box size 254mm 355mm +
Up to 2800mm box size 305mm 355mm +
Up to 3500mm box size 355mm 355mm +
Please note industrial shutters have different size plates/boxes. On widths exceeding 5000mm box size may move up one size due to deflection.
Galvanised steel standard polyester powder coat colours are available at an additional cost.
Standard guide rails: 38mm x 32mm x 3mm – 100mm x 32mm x 3mm dependant on width. Electric shutters require a 50mm x 50mm steel box section (both sides) used to allow for motor unit and safety brake. A 76mm x 50mm box section will be used for shutters over 160kg in weight (5000mm x 3200mm approximately).
Galvanised steel standard, polyester powder coat colours are available.
A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.
A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating. Draw 240 volts and 0.5 – 2.5 amps dependant upon the shutter size. Provision of a 13 amp fused spur is required for installation.
Design of this model will alter for three phase operation. Electrical requirements are dependant on usage, further details on request.
A manual override is included to operate the shutter in the event of a power failure. This is usually only Operable from only one side.
A counter balanced helical spring controlled via hand chain and chain lock to secure. Control Standard security key switch or rocker switch. Other controls are available on request.
Standard security key switch or rocker switch.
Other controls are available on request.
Prolong the life span of your door system with a maintenance contract from HAG. Regular maintenance reduces complications from wear and tear and allows for continual safe operation.
Faults happen unexpectedly and at inconvenient times, causing serious problems for premises. Our repair service can ensure your doors are repaired quickly, minimising down time and reduce potential losses.
High quality powder coating creates a professional finish to HAG products. A durable, fade resistant, long lasting finish applied by an award winning company.
Guarantee your new door system is installed professionally and to the highest standard. Benefit from the knowledge that a HAG installed product will be fully operational and installed on time.
HAG continue to manufacture bespoke doors to ensure exceptional standards and quality. Our experience in design, installation and maintenance helps us to produce doors suited to exact needs and requirements.
Benefit from experience and knowledge with our Door System Design service. HAG can help you meet your specification requirements by designing a door system tailored to your existing premises or building design.
HAG offers a wide range of products and services, if you would like further information call 0800 072 3444 now to speak to a member of our team.