Roller
Shutter Doors

Clear
Guard

The Clear Guard roller shutters is an eye-catching door product that gives impact to retail outlets by allowing maximum visual display through the product. It is constructed from hard-coated polycarbonate sheets with extruded Aluminium hinges.

HOW WE RATE THIS DOOR

HOW THIS DOOR IS COMMONLY USED

Product
Specification

Product Overview

Description

Clearguard, Constructed from UV- stabilized polycarbonate sheets With extruded Aluminium hinges.

Common use

Shop Front, Mall & Bank Security where high Vision and security is required

Maximum Width

7200mm

Dimensions

140mm x 3mm polycarbonate Profile

Finish

Fully Transparent Curtain, with silver anodised hinges and Guides as standard The polycarbonate is available in crystal clear, opal white & bronze

Shutter Box Specification

Construction

0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.

Box sizes

Up to 3650mm Height – 350mm

Finish

Polyester powder coat colours are available.

Guide Rail Specification

Construction

110mm x 38mm x 3mm extruded aluminium with PVC Guiding Strips

Finish

Mill finish as standard, polyester powder coat colours and anodised finishes are available.

Operation

Single Phase Electric

A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating. Draw 240 volts and 0.5 – 2.5 amps dependant upon the shutter size. Provision of a 13 amp fused spur is required for installation

Override

A manual override is included to operate the shutter in the event of a power failure. This is usually only operable from only one side.

Control

Standard security key switch or rocker switch.
Other controls are available on request.

Standards

Light Transmission: 87% > 90% Test Method according to DIN 5036 Extreme impact strength: ISO 179
Resistant against a high thermal expansion: temperatures – 100 up till + 120o C. Fire conduct: DIN 4102 fire slow-down.
Polycarbonate standard quality is suitable for inside- use, scratch resistant polycarbonate (coated on both sides) is suitable for outside-use. Applications in thickness: 3, 5 and 6 mm for rolling shutters, 5, 6 and 8 mm for safety-windows.

 

Operational Specification

Single Phase Electric

A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating. Draw 240 volts and 0.5 – 2.5 amps dependant upon the shutter size. Provision of a 13 amp fused spur is required for installation.

Override

A manual override is included to operate the shutter in the event of a power failure. This is usually only operable from only one side.

Control

Standard security key switch or rocker switch. Other controls are available on request.

Standards

Light Transmission: 87% > 90% Test Method according to DIN 5036 Extreme impact strength: ISO 179. Resistant against a high thermal expansion: temperatures – 100 up till + 120o C. Fire conduct: DIN 4102 fire slow-down. Polycarbonate standard quality is suitable for inside- use, scratch resistant polycarbonate (coated on both ides) is suitable for outside-use. Applications in thickness: 3, 5 and 6 mm for rolling shutters, 5, 6 and 8 mm for safety-windows.

Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering. HAG operates a policy of continuous improvement.

Our Specialist
Services

Talk to the
door specialists

Contact Us

HAG offers a wide range of products and services, if you would like further information call 0800 072 3444 now to speak to a member of our team.

Customers who viewed this
were also interested in