The Fireguard HF240 Fire Curtain is a premium fire resisting curtain giving 240 minute fire protection with the added benefit of 30 minutes irradiance shield. Tested and compliant to the latest European standards BS EN 16034. This adaptable fire curtain can be installed in suspended or solid ceilings. Widths up to 20 metres wide can be obtained by overlapping curtains. CERTIFIRE approved.
– Fire Integrity (E) 240 minutes
– Radiation Performance (EW30) 30 minutes
– Tested and compliant to BS EN 1634
– Compliant to BS EN 1363-1:1999
– Compliant to BS EN 1363-2:1999
– Compliant to BS EN 12101 Annex B
– Compliant to EN13501-2:2007 + A1:2009
– Full CE Compliance (conformity certificates on request)
– CERTIFIRE Certified
– Complies to Document Part M Building Regulations 2004
Components included as standard: Curtain, Guides, Bottom Rail, Box, Battery Backup, Control Unit, Motor.
Choice of primer or 75 standard powder coat finishes.
Additional specification levels and optimisable components available on request.
The Fireguard HF240 Fire Curtain is flexible in its installation. It can be Face or Reveal Fix to Steel, Masonry, Hardwood or Fire Boarded Softwood.
When application requires this fire protection system to be unseen the HF240 can be installed in suspended or solid ceilings.
The curtain is manufactured from a Woven Fibreglass and Stainless Steel Fabric with a coating of Intumescent Silicone.
Metal studs are sewn into the side of the curtain to ensure its correct position in the guide frames whilst in operation.
This Fire Curtain has two galvanised steel side guide rails of 100 mm x 50 mm.
Two galvanised steel head plates hold the shaft with the curtain, sizing dependent upon the height of the application.
Up to 4 metres high, 180 mm x 180 mm.
Over 4 metres high, 210 mm x 210 mm.
The Fire Curtain assembly comprises of a box housing at high level in which sits the shaft, motor and wrapped Curtain. The box is attached to channel section guides at each end.
A galvanised steel ‘Bell’ bottom rail provides the weight for the curtain to self-close.
The system is held in the open position by a Single Phase Electric 24v DC Motor. When a fire is detected or power is lost the motor will disengage and allow the Gravity Failsafe to activate.
The Fireguard HF240 Fire Curtain system is supplied with gravity failsafe control panel with in-built lead-acid battery support.
Dependant on the site fire protection requirements, various options are available to ensure compliance:
– Audio/visual warning devices
– Emergency retract switches
– Split drop & delayed drop programmes
– Beam sensors
Head box, guides and bottom rail are galvanised at source and can be powder coated as required to any standard RAL or BS4800 colour.
Fire curtains are naturally silver grey or charcoal finish, dependent on specification.
Silicone optical resin rescue vision windows can be specified, which allow emergency services to see into the area for rescue purposes. Positioning can be either at high or low level and will withstand direct flame at temperatures up to 1065 °C for periods of up to 2 hours.
Other optional extras include:
– Split drop
– Delay on alarm
– Beam sensor
– Emergency retract switches
– Smoke seals
– Visual alert system
These fire resisting curtains are suitable only for internal applications.
HAG provides full installation, repair and maintenance for the Fireguard HF240 Fire Curtain anywhere in the UK.
Regular maintenance is required for all safety products by Law. Competitive maintenance contracts are available on request.
Prolong the life span of your door system with a maintenance contract from HAG. Regular maintenance reduces complications from wear and tear and allows for continual safe operation.
Faults happen unexpectedly and at inconvenient times, causing serious problems for premises. Our repair service can ensure your doors are repaired quickly, minimising down time and reduce potential losses.
High quality powder coating creates a professional finish to HAG products. A durable, fade resistant, long lasting finish applied by an award winning company.
Guarantee your new door system is installed professionally and to the highest standard. Benefit from the knowledge that a HAG installed product will be fully operational and installed on time.
HAG continue to manufacture bespoke doors to ensure exceptional standards and quality. Our experience in design, installation and maintenance helps us to produce doors suited to exact needs and requirements.
Benefit from experience and knowledge with our Door System Design service. HAG can help you meet your specification requirements by designing a door system tailored to your existing premises or building design.
HAG offers a wide range of products and services, if you would like further information call 0800 072 3444 now to speak to a member of our team.