Operating automatically during an emergency, the Fireguard range also provides a high level of security. Offering capabilities of 60, 120, and 240 minutes of fire protection, depending on specification. Tested to BS EN 1634-1 compliant BS EN 16034:2014. Galvanised steel finish with powder coating available at additional cost. Recommended maximum width up to 12,000 mm.
Government Legislation changing 1st November 2019.
All new fire shutters must be:
Fire tested and compliant to latest standard BS EN 16034:2014 & CE Marked to BS EN 13241-1:2003
Products Tested to 2008 Certification will be prohibited by law!
The fireguard FG roller shutters are a range of fire protection barriers that automatically operate in an emergency situation once a signal is received from a fire alarm system. The Fireguard FG Range is a fire roller shutter that can be specified as:
• 1 hour fire protection. FG01
• 2 hour fire protection. FG02
• 4 hour fire protection. FG04
Constructed to the latest safety standards BS EN 1634-1 & compliant to BS EN 16034:2014 this electric roller shutter is manufactured from 76mm cold rolled 20 gauge galvanised steel sections.
The fireguard FG shutters are safety device’s that form a protection barrier against the spread of property fire for up to 4 hours and can be linked to many closing requirements such as audio alarm, visual beacon, time delay or subject to local fire officers advice. Tested Report Number WF396695 & BS EN 16034:2014.
The Fireguard FG Range roller shutter is best used in kitchen survery areas, warehouses, commercial areas here fire segregation is needed yet walk through or general day to day access is required.
Normally 76mm x 0.71mm
11.32kg per square metre (dependant on size)
Galvanised bright rolled mild steel but polyester powder coat colour’s are available at additional cost.
1.5mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.
Overall height (top of box)
Up to 3500mm box size 350mm
Up to 4250mm box size 375mm
Up to 5250mm box size 400mm
Up to 6000mm box size 450mm
Up to 8000mm box Size 600mm
On larger widths the box sizes may move up one size due to deflection.
Galvanised steel standard, polyester powder coat colours are available.
Barrel Support Brackets must be installed subject to size and fire integrity required.
63mm x 32mm x 3mm – 100mm x 32mm x 3mm Dependant on Width and Height.
Galvanised steel standard polyester powder coat colours are available.
Electrically operated through industrial grade 1 phase motor controlled by up/stop/close controller. Auto Reset solenoid for integration with fire alarm to enable the motor to automatically unbrake and close under controlled decent. FCP03 Fire panel which can be interconnected to the Fire Alarm to allow closing when receiving fire signal. Audio visual warning and timer delay. Further safety devices are available, dependant on requirements and operational circumstances.
Important note: Maintenance of fire shutters is required under the Regulatory Reform (Fire Safety) Order 005 for companies. Failure to do so may invalidate insurance cover and building fire certification under the control of the local fire officer.
It is essential that the structural surround to the opening has a fire rating of at least the equivalent to the fireguard product specified and is sufficient for fixings to ensure fully compliant installation.
Prolong the life span of your door system with a maintenance contract from HAG. Regular maintenance reduces complications from wear and tear and allows for continual safe operation.
Faults happen unexpectedly and at inconvenient times, causing serious problems for premises. Our repair service can ensure your doors are repaired quickly, minimising down time and reduce potential losses.
High quality powder coating creates a professional finish to HAG products. A durable, fade resistant, long lasting finish applied by an award winning company.
Guarantee your new door system is installed professionally and to the highest standard. Benefit from the knowledge that a HAG installed product will be fully operational and installed on time.
HAG continue to manufacture bespoke doors to ensure exceptional standards and quality. Our experience in design, installation and maintenance helps us to produce doors suited to exact needs and requirements.
Benefit from experience and knowledge with our Door System Design service. HAG can help you meet your specification requirements by designing a door system tailored to your existing premises or building design.
HAG offers a wide range of products and services, if you would like further information call 0800 072 3444 now to speak to a member of our team.