This SR2 security rated roller shutter is certified to LPS 1175 issue 7. Manufactured in accordance with BS EN 12489 and BS EN 12426. Designed for medium risk security commercial & domestic applications that required SR2 insurance rated roller shutters.
Tested to 3 minute attack time from a range of tools including pliers, axe, crowbar & gas torch.
high security roller shutter doors for Banks, Airports, Offices, Malls, Homes, Retail Outlets.
Certified for installation to concrete, sub assembly steel framework, structural steelwork, blockwork & brickwork.
Certified to LPS 1175 issue 7 using Xonar Series technology.
Curvered 90 mm twin-skin extruded aluminium in an anodised finish. (Option to have sections perforated is available for airflow & vision.)
Built in self-locking mechanism.
0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.
Overall height (top of box)
Up to 4000mm box size 300mm x 300mm
Over 4000mm box size 400mm x 400mm
Galvanised steel standard polyester powder coat colours are available at an additional cost.
Extruded Aluminium guide rails: 90mm x 30mm
Electric shutters require a 50mm x 50mm steel box section (both sides) used to allow for motor unit and safety brake.
Polyester powder coat colours are available.
A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating. Draw 240 volts and 0.5 – 2.5 amps dependant upon the shutter size. Provision of a 13 amp fused spur is required for installation.
Conventional or direct drive industrial motor unit with integral travel limits, thermal cut out, low level hand chain override or high level hand crank override and push button control as standard.
A manual override is included to operate the shutter in the event of a power failure. This is usually only Operable from only one side.
Standard security key switch or rocker switch. Other controls are available on request.
The Insurguard range comes anodised finish as standard but a range of polyester powder coat colours are available.
Prolong the life span of your door system with a maintenance contract from HAG. Regular maintenance reduces complications from wear and tear and allows for continual safe operation.
Faults happen unexpectedly and at inconvenient times, causing serious problems for premises. Our repair service can ensure your doors are repaired quickly, minimising down time and reduce potential losses.
High quality powder coating creates a professional finish to HAG products. A durable, fade resistant, long lasting finish applied by an award winning company.
Guarantee your new door system is installed professionally and to the highest standard. Benefit from the knowledge that a HAG installed product will be fully operational and installed on time.
HAG continue to manufacture bespoke doors to ensure exceptional standards and quality. Our experience in design, installation and maintenance helps us to produce doors suited to exact needs and requirements.
Benefit from experience and knowledge with our Door System Design service. HAG can help you meet your specification requirements by designing a door system tailored to your existing premises or building design.
HAG offers a wide range of products and services, if you would like further information call 0800 072 3444 now to speak to a member of our team.