SR4 Security rating roller shutters certified to LPS 1175 issue 7. Manufactured in accordance with BS EN 12489 and BS EN 12426. Designed for medium risk security commercial & domestic applications that required SR4 insurance rated roller shutters.
Tested to 10 minute attack time from a range of tools including grinders, jigsaw, drills, crowbar & sledgehammer.
FEATURES VERTICAL ROLLING OPERATION
DESIGNED FOR HIGH SECURITY
SR4 High level security roller shutter doors for mainframe computer rooms, government buildings, banks, laboratories.
Certified for installation to concrete, sub assembly steel framework, structural steelwork & blockwork.
Certified to LPS 1175 issue 7 using Xonar Series technology.
Curvered 90 mm twin-skin extruded aluminium in an anodised finish with a reinforced core.
Built in self-locking mechanism.
Normally 90mm
0.91mm bright spangle galvanised pressed steel coil casing available in various different designs to suit individual circumstances.
Overall height (top of box)
Up to 4000mm box size 300mm x 300mm
Over 4000mm box size 400mm x 400mm
Galvanised steel standard polyester powder coat colours are available at an additional cost.
Extruded Aluminium guide rails: 120mm x 70mm
Electric shutters require a 50mm x 50mm steel box section (both sides) used to allow for motor unit and safety brake.
Polyester powder coat colours are available.
A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating. Draw 240 volts and 0.5 – 2.5 amps dependant upon the shutter size. Provision of a 13 amp fused spur is required for installation.
Conventional or direct drive industrial motor unit with integral travel limits, thermal cut out, low level hand chain override or high level hand crank override and push button control as standard.
A manual override is included to operate the shutter in the event of a power failure. This is usually only Operable from only one side.
Standard security key switch or rocker switch. Other controls are available on request.
The Insurguard range comes anodised finish as standard but a range of polyester powder coat colours are available.
HAG offers a wide range of products and services, if you would like further information call 0800 072 3444 now to speak to a member of our team.
