The Q Door is a bi-folding industrial door providing a high level of insulation and security.
With the option of insulated double glazed windows within the panels. Crafted from robust and galvanised steel with inserted CFC-free polyurethane foam. It is the sturdiest and most resilient industrial door system.
Recommended maximum width up to 14,000 mm.
The Q Door is a bi-folding panel industrial door.
Used for applications that require high levels of thermal protection such as industrial premises, fire stations, ambulance stations or hanger bay doors.
The door panel is made by robust steel reinforced stretch-frame holding pressure cast Polyurethane foam between outer coverings. The outer skin can be either plastic coated or galvanised steel 0.6mm thick skin in a profiled design. The pressure cast Polyurethane foam is completely Freon free making the door the most sturdy and resilient in its class. *(Figure: Of 52Kg density / m3). The reinforced stretch-frame is 5mm thick steel with anchor profiles to reinforce locks, hinges and mountings for incomparable durability.
Fixings that do move for operation proposes, have been designed on the basis of simplicity and heavy dimensioning to guarantee extremely low service cost and a long service life in respect of operating functions, corrosions, energy saving Etc. Two Specifically Developed Hinges That Provide Variations. KGJQ- (Standard hinge) Normally used together with a steel plate door sil 100x100mm that is fitted to the floor. Each time the door moves the steel door is swept off; providing a flat and clean sealing surface. KGJQ is adjustable vertically. 3D Hinge – Is used on flat floors (or if the floor slopes towards the door). Multi dimensional adjustment and lifting movement. Roller bearing runs on the track and lifts the door while moving. To adjust the door and seal vertically and sideways.
All electric operated Q doors are automatic locking
Q Door is operated and locked as standard on the inside using a padlock on an external cremone bolt. As an extra the cremone bolt can be fitted with a cylinder lock (excl. cyl.)
It is important that the door is equipped with a sealing system that withstands ageing that is why there are four different corner-sealing joints placed around the door. The rubber sealing system gives the door the markets best Insulation and tightness tested values for insulation.
Q doors F4’s Sealing system complies with this top European requirement, but at three times the pressure! *(Figures: The top European class 3 for air leakage describes air leakage (T Value) as at best 1.5m3/m2/h at 50 Pa pressure. I.e. 1.5 m3 / m2 /h to 150 Pa).
Windows can be placed in variable combinations and sizes in the door panel as an extra. The standard windows have aluminium frames, with the option of powder coating. All window frames are constructed with an open thermal bridge and Toughened Insulated Double Glazed Glass as standard for insulation.
The motor is simple, reliable and extremely durable. This virtually eliminated any maintenance costs. There are two versions of motor unit, which operate closing at the rate 8 or 12-second. This choice reduces heat loss by matching the correct speed motor with your access speed be it vehicle or pedestrian.
When in the open position the door leafs are held back with the door holder for safety. The door holder engages and locks when the door is opened and is manually disengaged before closing. Alternatively doors that open inwards can be fitted with a gas spring controlled door holder with a semi automatic opening mechanism. When the set time limit is reached the door holder deactivates and allows the door to close automatically. No special actions are required to set or close the door. Electric Doors will self hold open.
Sensors disengage door movement Built within the sealing system are sensors, when an object touches the rubber seal the sensor is activated and disengaged movement of the door.
Customising the Q Door to Your Specification adapting
• Entry door
• Opening inward opening or outward
• Window Grille
• Door Stop
• Operation, Manual or electric
For example a door 5000 mm x 5000 mm with 4 panels
• Resistance to Wind load, Class (0-5):5
• Water tightness, Class (0-3) :3
• Air Permeability, Class(0-6):5
• Thermal ability (U-Value) complete door:0,9
• Thermal ability (U-Value) best average of panel:0,23
Prolong the life span of your door system with a maintenance contract from HAG. Regular maintenance reduces complications from wear and tear and allows for continual safe operation.
Faults happen unexpectedly and at inconvenient times, causing serious problems for premises. Our repair service can ensure your doors are repaired quickly, minimising down time and reduce potential losses.
High quality powder coating creates a professional finish to HAG products. A durable, fade resistant, long lasting finish applied by an award winning company.
Guarantee your new door system is installed professionally and to the highest standard. Benefit from the knowledge that a HAG installed product will be fully operational and installed on time.
HAG continue to manufacture bespoke doors to ensure exceptional standards and quality. Our experience in design, installation and maintenance helps us to produce doors suited to exact needs and requirements.
Benefit from experience and knowledge with our Door System Design service. HAG can help you meet your specification requirements by designing a door system tailored to your existing premises or building design.
HAG offers a wide range of products and services, if you would like further information call 0800 072 3444 now to speak to a member of our team.