Specifically designed for use in domestic garages, these roller garage doors are manufactured from doubled skinned foam filled aluminium to provide security and enhanced noise reduction. Electrically operated with a Seceurosmart remote control. Available in a selection of finishes upon request. Recommended maximum width up to 5,400mm.
The SeceuroGlide roller garage doors are manufactured from a double skinned insulated foam filled aluminium slat with webbing cushion ends to enhance noise reduction and prevent excessive marking.
The patented integral locking system, safety facility with remote control operation, and variable security conscious guide options complete a combination that provides the ultimate rolling garage door.
Seceuroglide garage doors are constructed from double skin foam filled aluminium slat.
Roller Garage Doors for domestic properties
Nominally 77mm high x 19mm thick.
6kg per square metre.
White, brown, light beige, burgundy red, fir green or black & medium woodgrain (surcharges apply)
Roll formed aluminium in two sections; top and bottom boxes. Bottom box removable for installation and maintenance and chamfered 45 degrees.
Clear opening height (to underside of box):
2500mm box size 300mm
3500mm box side 350mm
White, dark brown, Alternative standard RAL or BS colours at an
Extruded aluminium with an integral box section for reinforcement and to facilitate fixing. Neoprene seals for quiet and smooth operation.
75mm wide x 34mm deep up to 4600mm wide
90mm wide x 34mm deep up to 5200mm wide
White, brown, light beige, burgundy red, fir green or black.
(Insulation 2.8 watts per m2 Kelvin w/m2k
Decibel reduction at 500HZ = 18
Decibel reduction at 1000MHZ = 25
Provision of a 13 amp fused spur is required for installation A tubular motor within the barrel assembly with limit switches and the thermal cut out to prevent overheating. Draw 240 volts and 0.5 – 2.5 amps dependant upon the shutter size.
Seceurosmart Remote Control unit with 2 Hand transmitters, Wireless Safety edge, internal manual override and light.
Prolong the life span of your door system with a maintenance contract from HAG. Regular maintenance reduces complications from wear and tear and allows for continual safe operation.
Faults happen unexpectedly and at inconvenient times, causing serious problems for premises. Our repair service can ensure your doors are repaired quickly, minimising down time and reduce potential losses.
High quality powder coating creates a professional finish to HAG products. A durable, fade resistant, long lasting finish applied by an award winning company.
Guarantee your new door system is installed professionally and to the highest standard. Benefit from the knowledge that a HAG installed product will be fully operational and installed on time.
HAG continue to manufacture bespoke doors to ensure exceptional standards and quality. Our experience in design, installation and maintenance helps us to produce doors suited to exact needs and requirements.
Benefit from experience and knowledge with our Door System Design service. HAG can help you meet your specification requirements by designing a door system tailored to your existing premises or building design.
HAG offers a wide range of products and services, if you would like further information call 0800 072 3444 now to speak to a member of our team.