Product Specification
Product Compliance
– Fire Integrity (E) 90 minutes (Doorset)
– Fire Integrity (E) 30 minutes (Sliding Doors)
– Both types of doors are bullet and burglary proof
– Tested and compliant to BS EN 1634
– Available PAS 24 certified*
– Full CE Compliance (Conformity certificates on request)
– CERTIFIRE Certified
– Complies to Document Part M Building Regulations 2004
Product Overview
The Fireguard FD05 Glass Doorsets can be adapted to suit requirements and are type approved, with features including finger trap gaskets, around windows and arches.
The systems have profiles adapted for modular locks (85 mm) as well as narrow (20 mm) and wide (130 mm, 180 mm and 260 mm) profiles. These tested and approved systems also come in a wide variety of heights and widths.
Wall sections up to 3.45m height and with a free edge have been tested as per EN 1364-1 to ensure compliance up to EI 120, and 4 metres height sections up to EI 60.
Operation
The Fireguard FD05 Fire Resisting Glass Doorsets are manual operation as standard.
Sliding Doors are operated using Besam Unislide (including LD 550494).
Profiles
Profile depth of frames available at 65mm, 70mm and 90mm.
Sliding doors have a maximum section dimension of 10m x 3m, and the maximum door leaf dimensions are 1250 mm. This provides a maximum opening of 2210 mm for bi-parting sliding doors.
Finish
Our fire resisting glass door frames can be Powder Coated as required to any standard RAL or BS4800 colour.
Specification of Build
Note: Sliding doors must not be installed along evacuation routes and if required an emergency exit door should be installed at the side.
Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering. HAG operates a policy of continuous improvement.
