Specifically designed fire shutters, fire doors, smoke curtains and fire curtains to offer the optimum protection for premises and occupants during an outbreak of fire. Suited for all establishments, including high risk areas such as kitchens. Products offer fire protection ranging from 1-4 hours and can be seamlessly integrated into existing fire and security alarm systems.
Offering the ability to be installed in areas where traditional fire shutters are not possible. Delivering a fire protection barrier for 1-4 hours depending on model, while providing a high level of security. Tested to BS EN 1634-1 & BS 476 Part 22. Galvanised steel finish with powder coating available at additional cost. Recommended maximum width up to 7,000mm for this fire shutter.
Operating automatically during an emergency, the Fireguard range of fire shutters also provides a high level of security. Offering capabilities of 60, 120, and 240 minutes of fire protection, depending on specification. Tested to BS 476 Part 22 & BS EN 1634-1. Galvanised steel finish with powder coating available at additional cost. Recommended maximum width up to 12,000mm.
A fire curtain which offers 60-minute fire protection and can be linked to the buildings emergency fire protection systems to prevent the spread of fire by containment. It’s specially coated glass fibre curtain protects against hot air transfer & protects main escape routes. The HF60 Fire Curtain can be installed in widths up to 5000mm and heights up to 6000mm. Multiple curtains up to 20 metres wide. CERTIFIRE approved.
A fire curtain offering 240 minute fire protection, with the benefit of 30 minutes irradiance. Tested to the latest European standards. This product can be installed in suspended or solid ceilings and comes complete with backup power supply. Multiple curtains up to 20 metres wide with an overlapping configuration, heights up to 6000mm. CERTIFIRE approved.
The HFS Plus smoke and fire curtain provide the best levels of protection for fire and irradiance to property and personnel. Its designed to provide safe passage next to the fire curtain (for corridor and escape routes) and protection for close contact. Complete with smoke seals as standard to provide 120 minutes of smoke & fire protection. CERTIFIRE approved.
A 2 hour smoke curtain tested up to a temperature of 600oC, this system can be specified as fixed or automated so to compartment, channel and protect escape routes from smoke. The smoke curtain can be continuous, with no maximum width and can be installed discreetly for low headroom requirements. CERTIFIRE approved.
The FD01 is a fire rated steel door that prevents the spread of fire and provided’s good security. With capabilities of 60, 120, and 240 minutes of fire protection depending on specification. Tested to BS 476 part 20 & 22, BS EN 1634 and holds CERTIFIRE certificates. Single steel fire doors provide maximum openings of 1250mm. Double steel fire doors openings maximum of 2600mm. All heights up to 2800mm.
The Fireguard Glass Door FD05 is a glass fire resistant door system tested to BS EN 1634-1. Our glazed fire doors can be specified as door sets or automatic sliding doors for main passageways and entrances used for fire evacuation routes. Acoustic reduction Up to 55dB, Ballistic resistant to BS EN 1522 & FB3NS to FB7NS, Intruder resistant to BS EN 1627 RC2 to RC5.